Removal and replacement procedures 62
18.
Install the hard drives ("
Drive
" on page
26
).
19.
Install the hard drive blanks ("
Drive blank
" on page
26
).
20.
Install the access panel ("
Access panel
" on page
25
).
21.
Install the server blade.
After you replace the system board, you must re-enter the server blade serial number and the product ID.
1.
During the server blade startup sequence, press the
F9
key to access RBSU.
2.
Select the
Advanced Options
menu.
3.
Select
Service Options
.
4.
Select
Serial Number
. The following warning appears:
Warning: The serial number should ONLY be modified by qualified service
personnel. This value should always match the serial number located on the
chassis.
5.
Press the
Enter
key to clear the warning.
6.
Enter the serial number and press the
Enter
key.
7.
Select
Product ID
. The following warning appears:
Warning: The Product ID should ONLY be modified by qualified service
personnel. This value should always match the Product ID located on the
chassis.
8.
Enter the product ID and press the
Enter
key.
9.
Press the
Esc
key to close the menu.
10.
Press the
Esc
key to exit RBSU.
11.
Press the
F10
key to confirm exiting RBSU. The server blade automatically reboots.
Server blade release lever assembly
To remove the component:
1.
Power down the server blade (on page
23
).
2.
Remove the server blade (on page
24
).
3.
Remove the access panel ("
Access panel
" on page
25
).
4.
Remove all hard drives ("
Drive
" on page
26
).
5.
Remove all hard drive blanks ("
Drive blank
" on page
26
).
6.
Remove all DIMM baffles ("
DIMM baffles
" on page
28
).
7.
Remove all DIMMs ("
DIMMs
" on page
29
).
8.
Disconnect the capacitor pack cabling, if connected ("
FBWC capacitor pack cabling
" on page
71
).
9.
Remove the SAS controller ("
SAS controller
" on page
38
).
10.
Remove the heatsink blank, if installed ("
Heatsink blank
" on page
31
).
11.
Remove the front panel/hard drive cage assembly ("
Front panel/drive cage assembly
" on page
49
).
Summary of Contents for 656395-006
Page 12: ...Customer self repair 12 ...
Page 13: ...Customer self repair 13 ...
Page 14: ...Customer self repair 14 ...
Page 21: ...Illustrated parts catalog 21 ...