manualshive.com logo in svg

HP 6530b - Compaq Business Notebook, Maintenance And Service Manual

Share
Download
HP 6530b - Compaq Business Notebook Maintenance And Service Manual Download Page 87

21.

Remove the display hinges 

(2)

. The left and right display hinges are available using spare part

number 486772-001.

22.

If it is necessary to replace the WLAN antenna transceivers and cables, detach the WLAN antenna
transceivers 

(1)

 from the display enclosure. The WLAN antenna transceivers are attached to the

display enclosure with double-sided tape.

23.

Remove the WLAN antenna cables from the clips 

(2)

 built into the left and right sides of the display

enclosure.

24.

Remove the WLAN antenna transceivers and cables. The WLAN antenna transceivers and cables
are available using spare part number 486777-001.

25.

If it is necessary to replace the WWAN antenna transceivers and cables, detach the WWAN
antenna transceivers 

(1)

 from the display enclosure. The WWAN antenna transceivers are attached

to the display enclosure with double-sided tape.

Component replacement procedures

79

Summary of Contents for 6530b - Compaq Business Notebook
















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands