Bluetooth module
NOTE:
The Bluetooth module spare part kits do not include a Bluetooth module cable. The Bluetooth
module cable is included in the Cable Kit, spare part number 486281-001.
Description
Spare part number
For use only with HP Compaq 6535b computer models in all countries and regions except Japan
and Asia-Pacific countries and regions
398393-002
For use only with HP Compaq 6535b computer models in Japan and Asia-Pacific countries
and regions
450066-001
For use only with HP Compaq 6530b computer models
490809-001
Before removing the Bluetooth module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 46
).
Remove the Bluetooth module:
1.
Position the computer with the front toward you.
2.
Loosen the Phillips PM2.0×5.0 captive screw
(1)
that secures the Bluetooth module compartment
cover to the base enclosure.
3.
Lift the rear edge of the Bluetooth module compartment cover
(2)
, swing it forward, and remove
the cover
(3)
. The Bluetooth module compartment cover is available in the Plastics Kit, spare part
number 486292-001.
4.
Release the Bluetooth module
(1)
from the Bluetooth module compartment as far as the Bluetooth
module cable allows.
50
Chapter 4 Removal and replacement procedures
