manualshive.com logo in svg

HP 6530b - Compaq Business Notebook, Maintenance And Service Manual

Share
Download
HP 6530b - Compaq Business Notebook Maintenance And Service Manual Download Page 116

Select

To do this

●

Enable/disable embedded Bluetooth® device radio (enabled by default).

●

Enable/disable the Network Interface Controller (LAN) (enabled by default).

●

Set the wake on LAN state. Options include the following:

◦

Disabled

◦

Boot to Network (set by default)

◦

Follow Boot Order

●

Enable/disable the fingerprint device (enabled by default).

●

Enable/disable a modem device (enabled by default).

Port Options (all are enabled by
default)

NOTE:

All port options are enabled by default.

●

Enable/disable the smart card slot.

●

Enable/disable the ExpressCard slot.

●

Enable/disable the serial port.

●

Enable/disable the parallel port.

●

Enable/disable the flash media reader.

●

Enable/disable the USB port.

CAUTION:

Disabling the USB port also disables MultiBay devices and ExpressCard

devices on the advanced port replicator.

●

Enable/disable the 1394 port.

Set Security Level

Change, view, or hide security levels for all BIOS menu items.

Restore Security Defaults

Restore the default security settings.

108 Chapter 5   Computer Setup

Summary of Contents for 6530b - Compaq Business Notebook
















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands