Remove the USB/digital media board cable:
1.
Disconnect the USB/digital media board cable
(1)
from the system board.
2.
Remove the three Phillips PM2.5×5.0 screws
(2)
that secure the USB/digital media board to the
base enclosure.
3.
Remove the USB/digital media board
(3)
.
Reverse this procedure to install the USB/digital media board.
Rear cover
Description
Spare part number
Rear cover
486291-001
Before removing the rear cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4.
Remove the battery (see
Battery on page 46
).
5.
Remove the following:
a.
Hard drive (see
Hard drive on page 52
)
b.
Optical drive (see
Optical drive on page 55
)
c.
Keyboard (see
Keyboard on page 61
)
d.
Switch cover (see
Switch cover on page 65
)
Component replacement procedures
93
