e.
Display assembly (see
Display assembly on page 74
)
f.
Top cover (see
Top cover on page 81
)
Remove the rear cover:
1.
Turn the computer upside down, with the rear panel toward you.
2.
Remove the three Torx8 T8M2.5×9.0 screws that secure the rear cover to the base enclosure.
3.
Turn the computer right side up, with the front toward you.
4.
Remove the three Phillips PM2.5×3.0 broad-head screws
(1)
and the two Phillips PM2.5×5.0
screws
(2)
that secure the rear cover to the base enclosure.
5.
Lift the rear edge of the rear cover
(1)
until it disengages from the base enclosure.
94
Chapter 4 Removal and replacement procedures
