Microphone extension cable
NOTE:
The microphone extension cable is included in the Cable Kit, spare part number 486281-001.
Before removing the microphone extension cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4.
Remove the battery (see
Battery on page 46
).
5.
Remove the following:
a.
Hard drive (see
Hard drive on page 52
)
b.
Optical drive (see
Optical drive on page 55
)
c.
Keyboard (see
Keyboard on page 61
)
d.
Switch cover (see
Switch cover on page 65
)
e.
Display assembly (see
Display assembly on page 74
)
f.
Top cover (see
Top cover on page 81
)
g.
Rear cover (see
Rear cover on page 93
)
h.
SIM connector board (see
SIM connector board on page 95
)
i.
System board (see
System board on page 99
)
Remove the microphone extension cable:
Remove the microphone extension cable
(1)
from the clips
(2)
built into the base enclosure.
Reverse this procedure to install the microphone extension cable.
102 Chapter 4 Removal and replacement procedures
