HP 6515b - Notebook PC Maintenance And Service Manual Download

Page: 87 / 166

10.

Remove the six Torx T8M2.5×6.0 screws

(1)

that secure the display panel to the display

enclosure.

11.

Remove the display panel

(2)

12.

Remove the four Phillips PM2.0×3.0 screws

(1)

that secure each display hinge to the display panel.

13.

Remove the display hinges

(2)

NOTE:

The left and right display hinges are available using spare part number 447204-001.

Reverse this procedure to install the display assembly.

Top cover

Description

Spare part number

Top cover (includes TouchPad, TouchPad cable, and fingerprint reader)

443921-001

Component replacement procedures

Summary of Contents for 6515b - Notebook PC







































































































































































Search results

Summary of Contents for 6515b - Notebook PC

Reviews:

Related manuals for 6515b - Notebook PC

Brands by name

Popular brands

HP 6515b - Notebook PC, Maintenance And Service Manual

Search results

Summary of Contents for 6515b - Notebook PC

Reviews:

Related manuals for 6515b - Notebook PC

Brands by name

Popular brands