HP 6515b - Notebook PC Maintenance And Service Manual Download

Page: 107 / 166

Select

To do this

●

Enable/disable LAN Power Save. When enabled, saves power by turning off
the LAN when not in use.

●

Enable/disable SATA Native Mode.

●

Enable/disable Dual Core CPU.

●

Enable/disable Secondary Battery Fast Charge.

●

Choose Bit-shift or LBA assisted HDD Translation Mode.

●

Enable/disable Windows direct application launcher.

●

Enable/disable HP Lockout.

Built-In Device Options

●

Enable/disable embedded WWAN Device Radio.

●

Enable/disable embedded WLAN Device Radio.

●

Enable/disable embedded Bluetooth® Device Radio.

●

Enable/disable LAN/WLAN Switching. When enabled, switches to a WLAN
when a LAN is either unavailable or disconnected.

●

Enable/disable Wake on LAN from Off.

●

Enable/disable the ambient light sensor.

Port Options

●

Enable/disable the serial port.

●

Enable/disable the parallel port.

●

Enable/disable the flash media reader.

●

Enable/disable the USB port.

CAUTION:

Disabling the USB port also disables MultiBay devices and

ExpressCard devices on the advanced port replicator.

●

Enable/disable the 1394 port.

●

Enable/disable the cardbus slot.

●

Enable/disable the ExpressCard slot.

●

Enable/disable the infrared port.

●

Enable/disable the optical disk drive.

●

Enable/disable the network controller.

Computer Setup menus

Summary of Contents for 6515b - Notebook PC







































































































































































Search results

Summary of Contents for 6515b - Notebook PC

Reviews:

Related manuals for 6515b - Notebook PC

Brands by name

Popular brands

HP 6515b - Notebook PC, Maintenance And Service Manual

Search results

Summary of Contents for 6515b - Notebook PC

Reviews:

Related manuals for 6515b - Notebook PC

Brands by name

Popular brands