Computer feet
The computer feet are adhesive-backed rubber pads. The feet are included in the Plastics Kit, spare
part number 443905-001. There are 8 feet in 2 different sizes. The feet attach to the base enclosure in
the locations illustrated below.
Bluetooth module
NOTE:
A Bluetooth module cable is not included in the Bluetooth module spare part kit. This cable is
included in the Cable Kit, spare part number 443887-001.
Description
Spare part number
For use in all countries and regions except Japan and Asia/Pacific
398393-002
For use in Japan and Asia/Pacific countries and regions
450066-001
Before removing the memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 46
).
Remove the Bluetooth® module:
1.
Position the computer with the front toward you.
2.
Loosen the Phillips PM2.0×5.0 screw
(1)
that secures the Bluetooth module compartment cover to
the computer.
52
Chapter 4 Removal and replacement procedures
Summary of Contents for 6515b - Notebook PC
