HP 6515b - Notebook PC Maintenance And Service Manual Download

Page: 90 / 166

11.

Remove the top cover

(3)

by lifting it straight up.

12.

If it is necessary to replace the microphone and cable, disconnect the microphone cable

(1)

from

the PC Card/audio board and remove it.

NOTE:

The microphone is available in the Cable Kit, spare part number 443887-001.

13.

If it is necessary to replace the Bluetooth module cable, disconnect the cable

(2)

from the system

board and remove the cable from the opening

(3)

in the base enclosure.

NOTE:

The Bluetooth module cable is available in the Cable Kit, spare part number 443887-001.

Chapter 4 Removal and replacement procedures

Summary of Contents for 6515b - Notebook PC







































































































































































Search results

Summary of Contents for 6515b - Notebook PC

Reviews:

Related manuals for 6515b - Notebook PC

Brands by name

Popular brands

HP 6515b - Notebook PC, Maintenance And Service Manual

Search results

Summary of Contents for 6515b - Notebook PC

Reviews:

Related manuals for 6515b - Notebook PC

Brands by name

Popular brands