![background image](http://html.mh-extra.com/html/hp/635n-jetdirect-ipv6-ipsec-print-server/635n-jetdirect-ipv6-ipsec-print-server_administrators-manual_163681116.webp)
Specify IPsec/Firewall Template
Any prior IPsec templates created (for example, for other rules) will be listed in the
IPsec/Firewall
Templates
field. Because IPsec templates are network dependent, predefined factory-default templates
are not supplied.
●
If the list is empty, the
Create IPsec Template
page will appear instead, so that you can create a
template.
●
If a desired IPsec template is not in the list, click
New
to create a custom template using the
Create
IPsec Template
page.
To view or delete a listed template, select it and click
View
or
Delete
as appropriate.
After an IPsec template has been added to the list and selected, click
Next
to complete the rule.
Create IPsec Template
Use this page to create an IPsec template and to specify how Security Associations (SAs) will be created:
manually or dynamically. To create an IPsec template:
1.
Enter a unique name for the template.
2.
Select an authentication type. See the item descriptions below.
3.
Click
Next
.
NOTE:
Depending on your selection of the authentication type (IKEv1 or manual keys) on this
page, subsequent configuration pages will differ when you click
Next
.
Table 5-7
Create IPsec Template page
Item
Description
IPsec Template Name
Enter a name for a custom IPsec template in the edit box. This name will be added to
the
Specify IPsec Template
page.
NOTE:
The IPsec template name must be unique.
Authentication Type
Hosts specified in the Address template must negotiate IPsec security settings during a
session. During negotiation, authentication must occur to validate sender/receiver
identities. Select one of the following authentication types.
●
Internet Key Exchange Version 1 (IKEv1)
(default): Use Internet Key Exchange
(IKE) protocols for authentication and encryption and to create Security
Associations.
●
Set IKE Defaults
: Select a default security profile for IKE operation. Several
predefined profiles are provided. To configure a custom security profile, select
the
Specify Custom Profile
option.
●
Preview IKE Defaults
button: View the settings for a selected IKE default
security profile.
If you select IKE v1 for authentication and a default security profile, click
Next
. The
Identity Authentication
page will be displayed.
●
Manual Keys
: IPsec authentication/encryption protocols and keys will be
configured manually. Click
Next
to display the
IPsec Protocols
page.
106 Chapter 5 IPsec/Firewall Configuration (V.36.xx)
ENWW
Summary of Contents for 635n - JetDirect IPv6/IPsec Print Server
