HP 635n - JetDirect IPv6/IPsec Print Server, Administrator'S Manual, Page: 85 / 202

Item Description
(where OU is an Organization Unit container and O is an Organization container within the NDS
tree). The print server will also accept “marketing.mytown.lj”.
To disable NDS support, leave this field blank.
NOTE: NDS objects cannot be created by the embedded Web server.
Job Poll Interval Specifies the time interval (seconds) that the HP Jetdirect print server will wait to check for print
jobs in a print queue.
PJL Configuration For Printer Job Language (PJL) parameters, enable (check) or disable (clear) the parameters
provided:
● Banner Page (for printing separator pages between print jobs)
●
End-Of-Job Notification (if received from the printer, an end-of-job message will be
forwarded to a client application)
● Toner Low Notification (if received from the printer, the HP Jetdirect print server will
forward a “toner low” message to a client application)
AppleTalk
The AppleTalk tab allows you to configure selected AppleTalk settings on the HP Jetdirect print server.
See Table 4-10 AppleTalk Tab Settings on page 75 for a description of items on this page.
NOTE: The AppleTalk parameters displayed include the AppleTalk printer types that are
advertised on the network.
The HP Jetdirect print server supports AppleTalk Phase 2 only.
Table 4-10 AppleTalk Tab Settings
Item Description
AppleTalk Enable checkbox Enable (check) or disable (clear) the AppleTalk protocol on the print server. If AppleTalk is
enabled, AppleTalk parameters stored on the print server are displayed.
NOTE: HP Jetdirect 635n print servers: except for TCP/IP, network protocols are
disabled by factory default.
AppleTalk Name Specify the name of the printer on the AppleTalk network. If you enter a name that is already
assigned on your network, the AppleTalk name specified on the Jetdirect configuration page
will be followed by a number to indicate that it is a duplicate.
Type Identify the type of printer being advertised on the network. Up to two types can be displayed
(for example, HP LaserJet and LaserWriter).
Zone Select an available AppleTalk network zone for the printer. By default, the zone currently
selected will be displayed.
Click the Refresh selected zone Info button to refresh the list of available zones.
Table 4-9 IPX/SPX Tab Settings (continued)
ENWW Networking Tab 75