manualshive.com logo in svg

HP 635n - JetDirect IPv6/IPsec Print Server, Administrator'S Manual, Page: 146 / 202

Share
Download
HP 635n - JetDirect IPv6/IPsec Print Server Administrator'S Manual Download Page 146

Message

Description

BOOTP/DHCP SERVER

Displayed during initialization while the HP Jetdirect print server attempts to obtain its
TCP/IP configuration from a BOOTP or DHCP server. The temporary address displayed
is 0.0.0.0.

TFTP SERVER

The IP address of the system where the TFTP configuration file is located. During
initialization, the temporary address 0.0.0.0 is displayed.

Not Specified

: Indicates that a TFTP server has not been not been set.

WEB JETADMIN URL

If the HP Jetdirect print server is found on the network by HP Web Jetadmin, the URL
of the host system used for HP Web Jetadmin services is displayed. The URL is limited
to two lines and may be truncated.

Not Specified

: Indicates that the URL of the Web Jetadmin host system could not be

identified or is not configured.

BONJOUR SERVICE NAME

Specifies a name (alphanumeric string) assigned to this device or service. This name
is persistent and is used to resolve a particular device or service if socket information
(such as the IP address) changes from session to session. Apple Bonjour will display
this service. The default service name is the printer model and the LAN Hardware (MAC)
address.

IPv6 Section

The following table includes items displayed under the IPv6 section of the configuration page. 

Table 8-8

  

IPv6

 Section

Message

Description

STATUS

Current TCP/IPv6 status.

READY

: Indicates the HP Jetdirect print server is awaiting data over TCP/IP.

DISABLED

: Indicates that TCP/IP was manually disabled.

INITIALIZING

: Indicates that the print server is searching for the BOOTP server, or

trying to get the configuration file through TFTP. An additional status message may also
be displayed.

An error code and message is displayed if the print server is not ready. For more
information, see 

Table 8-13 Error Messages on page 140

.

LINK-LOCAL

Specifies the IPv6 Link Local address configured on the print server.

Not Configured

: A link local address has not been configured.

STATELESS

Specifies IPv6 Stateless addresses configured on the print server.

Not Configured

: A Stateless address has not been configured.

DHCPV6

Specifies the print server IPv6 stateful address configured by a DHCPv6 server.

Not Configured

: A stateful address has not been configured.

MANUAL

Specifies an IPv6 address manually configured on the print server, for example, through
the printer control panel or the embedded Web server.

Not Configured

: An address has not been manually configured.

Table 8-7

  IPv4 Section (continued)

136 Chapter 8   HP Jetdirect Configuration Pages

ENWW

Summary of Contents for 635n - JetDirect IPv6/IPsec Print Server











































































































































































































Reviews:

No comments