3-30
Troubleshooting and Diagnostics
HP Omnibook 6000/6100
Unique Dock ID
Sets whether the computer creates a unique hardware
profile for each dock (Enabled) or uses a common profile for
all docks (Disabled).
Enabled
UUID
Displays the value of the 16-byte UUID (Universally Unique
ID) as 32 hex characters.
Detected
automatically
System Devices Menu
Default
PS/2 Pointing Devices
Disables the internal pointing devices when an external PS/2
mouse is connected.
Auto
External Fn Key
Sets whether left CTRL+left ALT on an external keyboard is
interpreted as the Fn key.
Enabled
FDD Controller
Enables the floppy drive.
Enabled
Legacy USB Support
Enables BIOS support for USB mouse, keyboard, and floppy
disk drive.
Enabled
Internal LAN
Enables the internal (wired) LAN.
Enabled
Mini PCI Slot 1
Enables the PCI slot normally used for a wireless LAN.
Enabled
Mini PCI Slot 2
Enables the PCI slot normally used for a modem, which is
located under the cover on the bottom of unit. (Does not
affect Ambit modem.)
Enabled
Serial port
Enables the serial port.
Enabled
Base I/O address
Sets the I/O address.
3F8h
Interrupt
Sets the interrupt.
IRQ4
Infrared port
Enables the infrared port.
Disabled
Mode
Sets the hardware to support FIR (Fast IR) or SIR (Standard
IR) infrared communications.
FIR
Base I/O address
Sets the I/O address.
2F8h
Interrupt
Sets the interrupt.
IRQ3
DMA channel
Sets the DMA channel for Fast IR (FIR) mode.
DMA0
Parallel Port
Enables the parallel port.
Enabled
Mode
Sets the port to output only, bi-directional, EPP, or ECP.
ECP
Base I/O address
Sets the I/O address.
378h
Interrupt
Sets the interrupt.
IRQ7
DMA channel
Sets the DMA channel for ECP mode.
DMA1
Security Menu
Default
User Password is
Shows if a user password is set.
Clear
Administrator Password
is
Shows if an administrator password is set.
Clear
Set User Password
Press ENTER to set, change, or clear the user password.
The password can have no more than 8 characters (0-9,
A-Z), and cannot include special or accented characters.
Enter
Set Administrator
Password
Press ENTER to set, change, or clear the administrator
password, which protects BIOS Setup settings. The
password can have no more than 8 characters (0-9, A-Z),
and cannot include special or accented characters.
Enter
Boot
Sets whether a user password is required when the
computer boots. Requires the administrator password for
changes.
Enabled
Resume*
Sets whether a user password is required when resuming
from Standby or Hibernate mode. Requires the administrator
password for changes. (Windows 98 only.)
Enabled
Summary of Contents for 6100
