HP 5305 B, Operating And Service Manual

Page: 7 / 48

Model 5305B General
Information
The 5305B is applicable to mobile communication bands
in addition to VHF and UHF TV transmissions plus
TACAN/DME and ATC radar transponders.
9E-1-5. The 10855A Preamplifier is available to boost
the UHF sensitivity of the counter by a minimum of 22 dB.
9E-1-6. INSTRUMENT IDENTIFICATION
9E-1-7. Hewlett-Packard instruments have a 2-section,
10-character serial number (0000A00000) which is located
on the rear panel. The 4-digit serial prefix identifies
instrument changes. If the serial prefix of your instrument
differs from that listed on the title page of this manual,
there are differences between this manual and your
instrument. Instruments having higher serial prefixes are
covered with a "Manual Changes" sheet included with this
manual. If the change sheet is missing, contact the nearest
Hewlett-Packard Sales and Service Office listed at the
back of this manual. Instruments having a lower serial
prefix than that listed on the title page, are covered in the
backdating Section VII.
9E-1-8. EQUIPMENT SUPPLIED
9E-1-9. The 5305B is supplied with an operating and
service manual.
9E-1-2
9E-1-10. ACCESSORIES AVAILABLE
9E-1-11. For high-sensitivity UHF applications, the
10855A Preamplifier can be used with the 5305B. The
10855A covers the 2 MHz to 1.3 GHz range with a gain of
22 dB minimum. Power requirements are +15 volts at ≈ 40
mA. The 5305B has a front-panel connector to supply the
re 15 volts to 10855A.
9E-1-12. 5300A/5300B COMPATIBILITY
9E-1-13. The 5305B is fully compatible with either the
5300A or the 5300B mainframe. Unlike the 5305A, a high-
stability time base is not available for the 5305B, however
a high-stability time base is available for the 5300B.
9E-1-14. SPECIFICATIONS
9E-1-15. Specifications are listed in Table 9E-1-1 .
9E-1-16. RECOMMENDED TEST EQUIPMENT
9E-1-17. Test equipment recommended for testing,
calibration, and repair of the 5305B is listed in Table 1-2.