HP 5305 B, Operating And Service Manual

Page: 10 / 48

Model 5305B
Installation
SECTION IX E
5305B 1300 MHz COUNTER
SUBSECTION II
INSTALLATION
9E-2-1. UNPACKING AND INSPECTION top and bottom molded frame of polystyrene (HP Part No.
9220-1545). Also included with the instrument is a plastic
dust-protection cover (HP Part No. 9220-1762).
9E-2-5. ENVIRONMENT. Conditions during storage
and shipment should be normally limited as follows:
a. Maximum altitude: 25,000 ft.
b. Minimum temperature: -40°F( -40°C).
c. Maximum temperature: +167°F(+75°C).
9E-2-2. If the shipping carton is damaged, ask that the
carrier's agent be present when the instrument is unpacked.
Inspect the instruments for damage, such as scratches,
dents, broken knobs, etc. If the instrument is damaged or
fails to meet performance tests when used with the 5300B
Measuring System, notify the carrier and the nearest
Hewlett-Packard Sales and Service Office immediately.
Performance check procedures are located in Section IX E-
5, and Sales and Service Offices are listed in Section VI of
the 5300B portion of the manual. Retain the shipping
carton and the padding material for the carrier's inspection.
The Sales and Service Office will arrange for the repair or
replacement of the instrument without waiting for the
claim against the carrier to be settled.
9E-2-3. STORAGE AND SHIPMENT
9E-2-4. PACKAGING. To protect valuable electronic
equipment during storage and shipment, always use the
best packaging methods available. Your Hewlett-
Packard Sales and Service Office can provide packaging
material, such as that used for original factory packaging.
Contract packaging companies in many cities can provide
dependable custom packaging on short notice. Here is one
recommended packaging method:
a. The original container is a corrugated cardboard
box with 200 lbs. burst test (HP Part No. 9211-1620). The
instrument is secured and protected, while in the box, by a
9E-2-7. The 5305B 1300 MHz Counter must be used
with a mating 5300A or B Measuring System, before any
measurements can be made. To mate the 5305B 1300 MHz
Counter with a 5300 Measuring System, see Figure 2-1
and Paragraph 2-11 in the 5300 portion of the manual.
9E-2-8 PORTABLE OPERATION.
9E-2-9. The use of the HP Model 5310A Battery Pack
enables the 5300 Measuring System and 5305B 1300 MHz
Counter to be used in areas removed from ac power
sources. The 5310A Battery Pack typically provides 5
hours of portable operating time before recharging. Tables
1-2 and 1-4 in 5300 portion of the manual lists the HP
5310A Battery Pack as an available accessory.
Documentation on the 5310A is also included in Section
IV through VIII of the 5300 portion of the manual. To
prepare the 5300/5305B for portable operation, refer to
Paragraph 2-13 and Figure 2-2 in the 5300 portion of the
manual.
9E-2-1
9E-2-6. INSTALLATION AND REMOVAL OF
PLUG-ON