HP Vectra XU PC – Setting Up
Installing Accessories
••
6
•
Before installing accessory boards, check available system resources and change the
board's switch settings if necessary. (Refer to
Installing Accessory Boards
.)
•
After installing accessories, check the PC's configuration by running SETUP. (Refer to
“Configuring Your PC”.) If you installed ISA accessory boards, run the
ISA
Configuration Utility
in the
Plug and Play
group, in Windows. (Refer to
Installing
Accessory Boards
, later in this chapter.)
WARNING
For your safety, never remove the PC's cover without first removing the power
cord, and any connection to a telecommunications network.
Some large displays are heavier than one person can lift safely. Refer to the
display's documentation. If in doubt, never lift a large display without help.
Removing the Cover
1. Switch the PC and display OFF.
2. Disconnect the power cords from the power outlets. Disconnect the power cords from
the PC and display, then remove the display.
