HP 5/xx Introduction Manual Download Page 4

Page: 4 / 77

HP Vectra XU PC – Setting Up

Introduction

••

Introduction

In This Manual

Congratulations on the purchase of your new Hewlett-Packard Personal Computer with a
main processor and provision for an optional Dual Companion Processor.

This manual is intended for the person responsible for setting up this PC and installing
accessories in it.

This manual contains the following information:

Installing
Accessories

explains how to install any hardware accessories you purchased.

Configuring Your PC

explains how to configure the PC for the hardware accessories
you installed.

Using HP Utilities and
HP User Tools

explains how to use HP Utilities and HP User Tools.

Troubleshooting and
Error Messages

explains how to correct any problems with the PC.

Technical Information

provides technical information.

Index

gives an alphabetical list of the information in this manual.

NOTE

If you need more information on:

•

connecting the keyboard, mouse, display, and power cords, refer to the

Getting

Started

manual supplied with the PC

•

using the PC, refer to the

Getting Started

manual supplied with the PC

•

installing new software, refer to the application manuals

setting up a network, refer to the network manuals.

Summary of Contents for 5/xx














































































Search results

Summary of Contents for 5/xx

Reviews:

Related manuals for 5/xx

Brands by name

Popular brands

HP 5/xx, Introduction Manual

Search results

Summary of Contents for 5/xx

Reviews:

Related manuals for 5/xx

Brands by name

Popular brands