HP 3000/9x9KS Series Site Preparation And Requirements Manual Download Page 51

Page: 51 / 82

B-9

Configurations

The following tables list Minimum, Mid, High, and Maximum SPU configurations used to calculate
line current, M & consumption, and heat dissipation specifications.
The configurations listed in these tables:

•

Are field configurations

•

Do not necessarily represent what is shipped from the factory for an individual customer, and

•

Does not include Uninterruptible Power Supply (UPS) Data.

Table B-14. HP 3000 - 939KS, 959KS, 929KS, 969KS/x00, & 969KS/x20 SPU Configurations.

PCA

Min

Max

Processors

Memory Modules

I/O Modules

Total input Watts

Dependent on configuration and options
installed.

See Worksheets in Appendices B & C

Total VA at 200 VA

BTUs/hr

Summary of Contents for 3000/9x9KS Series



















































































Search results

Summary of Contents for 3000/9x9KS Series

Reviews:

Related manuals for 3000/9x9KS Series

Brands by name

Popular brands

HP 3000/9x9KS Series, Site Preparation And Requirements Manual

Search results

Summary of Contents for 3000/9x9KS Series

Reviews:

Related manuals for 3000/9x9KS Series

Brands by name

Popular brands