HP 3000/9x9KS Series Site Preparation And Requirements Manual Download Page 44

Page: 44 / 82

B-2

Regulatory Standards

The HP 3000 and HP 9000 Enterprise Servers comply with the regulatory standards in Table B-8.

Table B-8.

Regulatory Standards

Specification

Certification

Country

SAFETY

CSA C22.2 No. 950

CSA Certified

Canada

IEC 950

HP Verified

International

EN 60 950

HP Verified

European Community

EMKO-TUE(74)203/91

HP Verified

Nordic Countries

UL 1950

UL Listed

U.S.

EMI

FCC Part 15, Class A

HP Verified

U.S.

EN 55 022 Class A

HP Verified

European Community

CISPR 22 Class A

HP Verified

International

VCCI Type 1

VCCI Registered

Japan

EM IMMUNITY
to EN 50082-1:1992
as indicated:

IEC 801-2:1991/pr EN
55024-2:1992

Air Discharge

8 kV

Contact Discharge 4 kV

HP Verified

European Community

IEC 801-3:1984 pr EN
55024-3:1991
Radiated Immunity 3 V/m

HP Verified

European Community

IEC 801-4:1988/pr EN
55024-4:1992
Electrical Fast Transients:
1 kV Power Line
0.5kV Signal Line

HP Verified

European Community

Summary of Contents for 3000/9x9KS Series



















































































Search results

Summary of Contents for 3000/9x9KS Series

Reviews:

Related manuals for 3000/9x9KS Series

Brands by name

Popular brands

HP 3000/9x9KS Series, Site Preparation And Requirements Manual

Search results

Summary of Contents for 3000/9x9KS Series

Reviews:

Related manuals for 3000/9x9KS Series

Brands by name

Popular brands