HP 3000/9x9KS Series Site Preparation And Requirements Manual Download Page 61

Page: 61 / 82

B-19

Battery Runtime

20º C (68º F) or above
New battery

15 minutes over battery lifetime
15 minutes over full temperature range

Battery Recharge
Time

< 14 Hours (UPS OFF)
< 24 Hours (UPS Operating)

Optimum Battery
Lifetime (25º C/77º F)

3.5 to 5 years

Environmental Specifications

Operating
Temperature

5º to 40º C (41º to 104º F)
15% - 80% relative humidity (non-condensing)

Storage Temperature

-30º to 50º C (-20º to 122º F) Battery life is shortened severely
when temperature exceeds 25º C (77º F) for extended periods.
5% - 80% relative humidity (non-condensing)

Operating Altitude

3000 meters (10,000 ft.)

Storage Altitude

4572 meters (15,000 ft.)

Physical Specifications

Electronics Unit

Dimensions
Packaged:

Height - 41.0 cm (16.0 inches)
Width - 57.0 cm (22.5 inches)
Depth - 72.0 cm (28.4 inches)
Weight - 90.0 kg (198 lbs)

Dimensions
Unpackaged:

Height - 25.5 cm (10.0 inches) - 6 EIA rack units
Width - 42.5 cm (17.0 inches)
Depth - 61.0 cm (24.0 inches)
Weight - 84.0 kg (185.0 lbs)

Minimum Required Service Access Space:

Rear:
Side:
Front:

76.0 cm (30.0 inches)
0.0 cm (0.0 inches)
91.0 cm (36.0 inches)

Table B-23.

A2996A PowerTrust UPS Specifications

. (Continued)

Description

Specification

Summary of Contents for 3000/9x9KS Series



















































































Search results

Summary of Contents for 3000/9x9KS Series

Reviews:

Related manuals for 3000/9x9KS Series

Brands by name

Popular brands

HP 3000/9x9KS Series, Site Preparation And Requirements Manual

Search results

Summary of Contents for 3000/9x9KS Series

Reviews:

Related manuals for 3000/9x9KS Series

Brands by name

Popular brands