HP 17-x Series Page 85 Maintenance And Service Manual Download

Page: 85 / 112

Power connector

Description

Spare part number

Power connector cable

856680-001

Before removing the power connector cable, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.

Remove the battery (see

Battery on page 32

Remove the optical drive (see

Optical drive on page 33

Remove the bottom cover (see

Bottom cover on page 39

Remove the fan/heat sink (see

Fan/heat sink assembly on page 56

Remove the display (see

Display assembly on page 67

To remove the power connector cable:

Pull the tabs away from the connector (1).

Remove the power connector (2) from the computer.

Reverse this procedure to install the power connector cable.

Component replacement procedures

Summary of Contents for 17-x Series

















































































































Search results

Summary of Contents for 17-x Series

Reviews:

Related manuals for 17-x Series

Brands by name

Popular brands

HP 17-x Series, Maintenance And Service Manual

Search results

Summary of Contents for 17-x Series

Reviews:

Related manuals for 17-x Series

Brands by name

Popular brands