HP 17-x Series Page 39 Maintenance And Service Manual Download

Page: 39 / 112

Removal and replacement procedures for
Customer Self-Repair parts

CAUTION:

The Customer Self-Repair program is not available in all locations. Installing a part not supported

by the Customer Self-Repair program may void your warranty. Check your warranty to determine if Customer
Self-Repair is supported in your location.

NOTE:

HP continually improves and changes product parts. For complete and current information on

supported parts for your computer, go to

http://partsurfer.hp.com

, select your country or region, and then

follow the on-screen instructions.

Component replacement procedures

NOTE:

Please read and follow the procedures described here to access and replace Customer Self-Repair

parts successfully.

NOTE:

Details about your computer, including model, serial number, product key, and length of warranty,

are on the service tag at the bottom of your computer.

This chapter provides removal and replacement procedures for Customer Self-Repair parts.

There are as many as 2 screws that must be removed, replaced, or loosened when servicing Customer Self-
Repair parts. Make special note of each screw size and location during removal and replacement.

Component replacement procedures

Summary of Contents for 17-x Series

















































































































Search results

Summary of Contents for 17-x Series

Reviews:

Related manuals for 17-x Series

Brands by name

Popular brands

HP 17-x Series, Maintenance And Service Manual

Search results

Summary of Contents for 17-x Series

Reviews:

Related manuals for 17-x Series

Brands by name

Popular brands