HP 17-x Series Page 15 Maintenance And Service Manual Download

Page: 15 / 112

External component identification

Display

Component

Description

(1)

WLAN antennas (1 or 2)*

Send and receive wireless signals to communicate with wireless local
area networks (WLANs).

(2)

Webcam light

On: The webcam is in use.

(3)

Webcam

‒

or –

3D camera (select products only)

Records video and captures photographs. Some products allow you
to video conference and chat online using streaming video.

To use a webcam (integrated camera):

▲

Type

camera

in the taskbar search box, and then select

Camera.

(4)

Internal microphone

Records sound.

*The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the
antennas free from obstructions.

For wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that applies to your country or
region.

To access this guide:

▲

Select the Start button, select All apps, select HP Help and Support, and then select HP Documentation.

Display

Summary of Contents for 17-x Series

















































































































Search results

Summary of Contents for 17-x Series

Reviews:

Related manuals for 17-x Series

Brands by name

Popular brands

HP 17-x Series, Maintenance And Service Manual

Search results

Summary of Contents for 17-x Series

Reviews:

Related manuals for 17-x Series

Brands by name

Popular brands