HP 17-x Series Page 18 Maintenance And Service Manual Download

Page: 18 / 112

Component

Description

WARNING!

To reduce the risk of personal injury, adjust the

volume before putting on headphones, earbuds, or a headset.
For additional safety information, refer to the Regulatory,
Safety, and Environmental Notices.

To access this guide:

▲

Select the Start button, select All apps, select HP Help and
Support, and then select HP Documentation.

NOTE:

When a device is connected to the jack, the computer

speakers are disabled.

Top

TouchPad

Component

Description

(1)

TouchPad zone

Reads your finger gestures to move the pointer or activate items
on the screen.

(2)

Left TouchPad button

Functions like the left button on an external mouse.

(3)

Right TouchPad button

Functions like the right button on an external mouse.

Chapter 2 External component identification

Summary of Contents for 17-x Series

















































































































Search results

Summary of Contents for 17-x Series

Reviews:

Related manuals for 17-x Series

Brands by name

Popular brands

HP 17-x Series, Maintenance And Service Manual

Search results

Summary of Contents for 17-x Series

Reviews:

Related manuals for 17-x Series

Brands by name

Popular brands