HP Compaq Presario F500 - Notebook PC Maintenance And Service Manual Download

Page: 52 / 120

Disconnect the display panel cable

(2)

and the backlight cable

(3)

from the inverter.

NOTE:

The display inverter is available using spare part number 431391-001.

Remove the display inverter.

If it is necessary to remove the display panel, remove the six Phillips PM2.5×5.0 screws

(1)

that

secure the display panel to the display enclosure.

Remove the display panel

(2)

from the display enclosure.

NOTE:

The display panel is available using spare part number 442887-001.

If it necessary to remove the display hinges, remove the two Phillips PM2.0×3.0 screws

(1)

that

secure each hinge to the display panel.

Chapter

Removal and replacement procedures

Summary of Contents for Presario F500 - Notebook PC

























































































































Search results

Summary of Contents for Presario F500 - Notebook PC

Reviews:

Related manuals for Presario F500 - Notebook PC

Brands by name

Popular brands

HP Compaq Presario F500 - Notebook PC, Maintenance And Service Manual

Search results

Summary of Contents for Presario F500 - Notebook PC

Reviews:

Related manuals for Presario F500 - Notebook PC

Brands by name

Popular brands