manualshive.com logo in svg

HP Compaq Presario F500 - Notebook PC, Maintenance And Service Manual

The HP Presario F500 Notebook PC is a reliable and efficient device designed to enhance your computing experience. Featuring advanced technology and sleek design, this laptop guarantees seamless performance. Access the comprehensive User Manual for free download at manualshive.com to familiarize yourself with its features, enabling you to maximize its potential.

Share
Download
background image

Display

WARNING!

The backlight contains mercury. Caution should be exercised when removing and

handling the backlight to avoid damaging this component and causing exposure to the mercury.

CAUTION:

The procedures in this appendix can result in damage to display components. The

only components intended for recycling purposes are the liquid crystal display (LCD) panel and the
backlight. Careful handling should be exercised when removing these components.

NOTE:

Materials Disposal

. This HP product contains mercury in the backlight in the display

assembly that might require special handling at end-of-life. Disposal of mercury may be regulated
because of environmental considerations. For disposal or recycling information, contact your local
authorities or the Electronic Industries Alliance (EIA) at 

http://www.eiae.org

.

This section provides disassembly instructions for the display assembly. The display assembly must be
disassembled to gain access to the backlight 

(1)

 and the liquid crystal display (LCD) panel 

(2)

.

NOTE:

Disassembly procedures differ from one display assembly to another. The procedures

provided in this appendix are general disassembly instructions. Specific details, such as screw
sizes, quantities, and locations, and component shapes and sizes, can vary from one computer
model to another.

104 Chapter 

12

   Recycling

Summary of Contents for Presario F500 - Notebook PC

























































































































Reviews:

No comments

Related manuals for Presario F500 - Notebook PC

Fujitsu Siemens Computers Amilo L1310G Datasheet preview
Amilo L1310G
Brand: Fujitsu Siemens Computers Pages: 3
Ace ASPIRE S7-191 Quick Manual preview
ASPIRE S7-191
Brand: Ace Pages: 366
Ctl Chromebook PX14E User Manual preview
Chromebook PX14E
Brand: Ctl Pages: 12
Acer Aspire 4743Z Service Manual preview
Aspire 4743Z
Brand: Acer Pages: 354
Acer Aspire 7750Z Service Manual preview
Aspire 7750Z
Brand: Acer Pages: 274
Acer Aspire V5-571 Service Manual preview
Aspire V5-571
Brand: Acer Pages: 230
Toshiba A305-S6834 - Satellite - Core 2 Duo 1.83 GHz Specifications preview
A305-S6834 - Satellite - Core 2 Duo 1.83 GHz
Brand: Toshiba Pages: 3
Toshiba A305-S6909 Specifications preview
A305-S6909
Brand: Toshiba Pages: 4
Toshiba A305-S6908 Specifications preview
A305-S6908
Brand: Toshiba Pages: 4
Toshiba A305-S6864 Specification preview
A305-S6864
Brand: Toshiba Pages: 4
Toshiba A305-S6898 Specifications preview
A305-S6898
Brand: Toshiba Pages: 4
Toshiba A305-S6863 Specifications preview
A305-S6863
Brand: Toshiba Pages: 4
Toshiba A305-S6902 Specifications preview
A305-S6902
Brand: Toshiba Pages: 4
Toshiba A305-S6857 - Satellite - Core 2 Duo GHz Specifications preview
A305-S6857 - Satellite - Core 2 Duo GHz
Brand: Toshiba Pages: 4
Toshiba A305-S6853 Specifications preview
A305-S6853
Brand: Toshiba Pages: 4
Toshiba A305-S6841 - Satellite - Core 2 Duo 1.83 GHz Specifications preview
A305-S6841 - Satellite - Core 2 Duo 1.83 GHz
Brand: Toshiba Pages: 4
Toshiba A305-S6861 Specifications preview
A305-S6861
Brand: Toshiba Pages: 4
Toshiba A305-S6916 Specifications preview
A305-S6916
Brand: Toshiba Pages: 4

Brands by name

Popular brands

Load more brands