4
.
Remove the WLAN module
(3)
by pulling it away from the socket at an angle .
NOTE:
WLAN modules are designed with a notch
(4)
to prevent incorrect installation into
the WLAN module socket.
Reverse this procedure to install a WLAN module.
Optical drive
NOTE:
All optical drive spare part kits include an optical drive bezel.
Description
Spare part number
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive
442883-001
DVD-RW and CD-RW Combo Drive
442884-001
Before removing the optical drive, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power cord.
4
.
Remove the battery (see
Battery on page 28
).
Remove the optical drive:
1
.
Position the computer with the left side toward you.
2
.
Remove the Phillips PM2.5×7.0 screw
(1)
that secures the optical drive to the computer.
3
.
Insert a thin tool, such as a paper clip
(2)
, into the media tray release hole. (The optical drive media
tray is partially ejected from the optical drive bay.)
Component replacement procedures
35
Summary of Contents for Presario F500 - Notebook PC
Page 1: ...Compaq Presario F500 Notebook PC Maintenance and Service Guide ...
Page 6: ...vi ...
Page 93: ...Phillips PM2 5 4 0 screw 87 ...
Page 120: ......