Hard drive
Description
Spare part number
5400-rpm, 120-GB
442882-001
5400-rpm, 100-GB
444003-001
5400-rpm, 80-GB
442881-001
Before removing the hard drive, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power cord.
4
.
Remove the battery (see
Battery on page 28
).
Remove the hard drive:
1
.
Position the computer with the front toward you.
2
.
Loosen the two Phillips PM2.0×5.0 screws
(1)
that secure the hard drive cover to the computer.
3
.
Lift the right side of the hard drive cover
(2)
and swing it to left.
4
.
Remove the hard drive cover.
NOTE:
The hard drive cover is included in the Plastics Kit, spare part number 442891-001.
5
.
Use the Mylar tab
(1)
to lift the hard drive until it disconnects it from the system board.
Component replacement procedures
29
Summary of Contents for Presario F500 - Notebook PC
Page 1: ...Compaq Presario F500 Notebook PC Maintenance and Service Guide ...
Page 6: ...vi ...
Page 93: ...Phillips PM2 5 4 0 screw 87 ...
Page 120: ......