manualshive.com logo in svg

Hotpoint RGB744GER, Use And Care & Installation, Page: 45 / 48

Share
Download
Hotpoint RGB744GER Use And Care & Installation Download Page 45

PROBLEM

CLOCK 

DOES 

NOT WORK

OVEN LIGHT DOES NOT
COME ON

STRONG ODOR

OVEN WILL NOT
SELF CLEAN

OVEN DOOR WILL
NOT UNLOCK

OVEN NOT CLEAN AFTER
CLEAN CYCLE

POSSIBLE CAUSE

 Range electrical plug must be securely seated in a live power outlet. Check for

 fuse or tripped circuit breaker.

● 

Bulb may be loose or burned out.

● 

Electrical plug must be plugged into   1 ive power outlet.

● 

Improper air/gas ratio in oven. Adjust oven burner air shutter.

● 

An odor from 

 insulation around the oven liner is normal for the first few

times oven is used. This is temporary.

● 

Oven temperature is too high to set self-clean operation. Allow the range to cool

to room temperature and reset the controls.

● 

Door 

 handle not moved all the way to the right.

● 

Oven must cool below locking temperature (approximately 30 minutes after the

 cycle is complete).  Do not lock the door with door latch except when

using self-clean feature or the oven may lock.

● 

Oven controls not set properly. Review Operating the Self-Cleaning Oven section.

● 

Heavily soiled oven requires       4 hour clean time.

● 

Heavy 

 lovers should be cleaned up before starting clean cycle.

45

Summary of Contents for RGB744GER

















































Reviews:

No comments