INSTALLATION INSTRUCTIONS
❑
SEAL THE OPENINGS
Seal any openings in the wall behind the range
and in the
under the range when hookups
are completed.
❑
SURFACE BURNER IGNITION
operation of all
and oven burners
should be checked after range and
supply
lines have been carefully checked for leaks.
Push in one of the surface burner controls and
turn it to the
position. You will hear a
snapping sound indicating proper operation of
the spark module. once the air has been purged
from the supply lines, burner should
within
4 seconds. After burner lights, rotate knob out of
the
position. Try each burner in succession
until all burners have been checked.
Quality of Flames
The combustion quality of burner flames needs
to be determined visually.
If burner flames look like (A), call for service.
Normal
flames should look like (B) or
(C),
on the type of gas you use.
With
gas, some yellow tipping on outer
cones is normal.
(A) Yellow
Call for service
Yellow tips on
outer
Norma] for LP
Soft
blue
Normal for natural
❑
CHECK IGNITION OF OVEN BURNER
The oven is designed to operate quietly and
automatically. To operate the oven, turn the
OVEN SET knob to
and the OVEN TEMP
knob to 300° After 30-90 seconds, the oven
burner will ignite and burn until the set
temperature is reached. The oven burner will
continue to cycle on
off as necessary to
maintain the oven at the temperature indicated
by the OVEN TEMP knob.
To check ignition of the broil burner, turn the
OVEN SET knob to
and the OVEN
TEMP knob to BROIL. After 30-90” seconds, the
broil burner will ignite.
The oven requires electrical power operate. In
the case of a
outage, the oven burners on
these models cannot be lit manually with a match.
Gas will not flow unless the glow bar is hot.
If the oven is in use when a power outage occurs,
the oven burner shuts off and cannot be
until power is restored.
36
Summary of Contents for RGB744GER
Page 46: ...NOTES 46 ...