Hotpoint RGB744GER Use And Care & Installation Download Page 2

Page: 2 / 48

HELP US HELP YOU

Read this book carefully.

If you received a damaged range...

is intended help you operate and maintain your

Immediately contact the

(or builder) that sold

new range properly.

range.

Keep it handy

answers to your questions.

Save time and money. Before

YOU

If you don’t understand something or need

request service...

write (include your phone number):

Consumer Affairs

Check the

Solver in

Hotpoint

back of this book. It lists

Appliance Park

operating problems that you . . . . . ,

Louisville, KY 40225

correct yourself.

Write down the model and serial numbers.

Depending on your

you’ll

serial numbers on a

behind the kick panel.

or broiler drawer.

These numbers are also on the

Product

Ownership Registration Card that came

your

range. Before sending in this card,

numbers here:

Model Number

Serial Number

Use these numbers in

calls concerning your range.

A WARNING

●

ALL RANGES CAN TIP.

●

TO PERSONS

COULD RESULT.

●

INSTALL THE ANTI-TIP

DEVICE PACKED WITH
THE RANGE.

●

SEE THE INSTALLATION

INSTRUCTIONS.

IF YOU NEED SERVICE

To obtain service, see the Consumer Services

the back of this book.
To obtain replacement parts,

Service Centers.
We’re proud of our service

you to

pleased. If for

reason

not

service you receive, here are three

to follow

further help.
FIRST, contact the people who serviced your
appliance. Explain why you are not

cases, this will solve the

it’

still not pleased, write

the

your phone number-to:

Consumer Relations

Appliance

FIN

not resolved, write:

Appliance

IL 60606”

WARNING: If the information in this manual is not followed exactly, a fire or explosion may result
causing property damage, personal injury or death.

—Do not

store or use gasoline or other

●

Immediately call your gas supplier from a

flammable vapors and liquids in the vicinity

neighbor’s phone. Follow the gas supplier’s

of this or any

instructions.

—WHAT TO DO IF YOU SMELL GAS

●

you cannot reach your gas supplier, call

the fire department.

●

Do not try to light any appliance.

—Installation and service must be performed

●

Do not touch any electrical switch; do not

by a qualified installer, service agency or

use any phone in your building.

the gas supplier.

Summary of Contents for RGB744GER

















































Search results

Summary of Contents for RGB744GER

Reviews:

Hotpoint RGB744GER, Use And Care & Installation, Page: 2 / 48

Search results

Summary of Contents for RGB744GER

Reviews: