HOT RUNNER TECHNOLOGY 16S-06 Series Service And Maintenance Manual Download Page 8 | Manualshive

Page: 8 / 28

HOT RUNNER TECHNOLOGY 16S-06 Series Service And Maintenance Manual Download Page 8

EN

Master Language is English

Hot Runner System Installation Guide

SVC-17-0001_EN-Rev13

RESTRICTED: Property of Synventive.

- 593 -

All rights reserved. Errors and omissions excepted

For limited third party distribution based on need and intended use.

© 2021 Synventive Molding Solutions

H O T R U N N E R T E C H N O L O G Y

Hot Runner System Installation Guide

Service and Maintenance / Disassembly the Nozzle 16S-06 / 22S-0S Series

10.4.6.2

Disassembling the Nozzle Front Heater

1) Dismount the head heater (13) from the nozzle head (11), as

described in the above page 592.

2) Remove the circlip (6) from the nozzle tip (8).

Doc008804_RIS.png

NOTICE

To pull the front heater, the nozzle must be

clamped on the round nozzle head surface on a

vice by using protective caps. A clamping of the

flats would deform the head.

3) Fix the nozzle with the head (11) in a vice by using protective

caps.

Doc008805_RIS.png

«
...
6
7
8
9
10
...
»

Summary of Contents for 16S-06 Series





























Reviews:

No comments