manualshive.com logo in svg

HOT RUNNER TECHNOLOGY 16S-06 Series, Service And Maintenance Manual, Page: 24 / 28

Share
Download
HOT RUNNER TECHNOLOGY 16S-06 Series Service And Maintenance Manual Download Page 24

EN

Master Language is English 

Hot Runner System Installation Guide 

SVC-17-0001_EN-Rev13

RESTRICTED: Property of Synventive. 

- 609 -  

All rights reserved. Errors and omissions excepted

For limited third party distribution based on need and intended use. 

 

© 2021 Synventive Molding Solutions

H     O     T            R     U     N     N     E     R            T     E     C     H     N     O     L     O     G     Y

Hot Runner System Installation Guide

Service and Maintenance / Disassembly the Nozzle 16S-06 / 22S-0S Series

Shown are the tip nuts, for checking the correct seating of the tip inserts

good

good

good

incorrect

NOTICE

See examples of good and 

incorrect insert installations.
Make sure the insert must 

not exceeds the height of 

the nozzle tip head.
Incorrect items should not 

be further processed.

Doc004688.png

Assembling the Seal Cap on TTW Nozzle Tip

Doc007734.png

1)  Place the tip nut (a) on the tool (T2).
2)  Place the seal cap (b) on the tip nut (a).
3)  Using the tool (T1) to push the seal cap 

(b) on the tip nut (a).

Summary of Contents for 16S-06 Series





























Reviews:

No comments