HOT RUNNER TECHNOLOGY 16S-06 Series Service And Maintenance Manual Download Page 7 | Manualshive

Page: 7 / 28

HOT RUNNER TECHNOLOGY 16S-06 Series Service And Maintenance Manual Download Page 7

EN

Master Language is English

Hot Runner System Installation Guide

SVC-17-0001_EN-Rev13

RESTRICTED: Property of Synventive.

- 592 -

All rights reserved. Errors and omissions excepted

For limited third party distribution based on need and intended use.

© 2021 Synventive Molding Solutions

H O T R U N N E R T E C H N O L O G Y

Hot Runner System Installation Guide

Service and Maintenance / Disassembly the Nozzle 16S-06 / 22S-0S Series

10.4.6

Disassembly the Nozzle 16S-06 / 22S-0S Series

NOTICE

For the following work on the nozzle (with assembled nozzle head), the nozzle must be clamped in a vice via

using the tool holder (T2). It is not allowed to clamp the nozzle in a vice directly. A clamping of the flats would

deform the head.

10.4.6.1

Disassembling Nozzle Head Heater

Doc008820_RIS.png

1) Loosen the screws head heater (13)

clamp band.

Doc008821_RIS.png

2) Pull the nozzle head heater (13) from

the nozzle head (11).

Doc008822_RIS.png

3) Pull the thermocouple (12) out of the

nozzle head (11).

«
...
5
6
7
8
9
...
»

Summary of Contents for 16S-06 Series





























Reviews:

No comments