55
12. DISASSEMBLING AND ASSEMBLING VALVE SHAFT
(1) REQUIRED TOOLS AND PARTS
1) Adjustable wrench (small type)
2) Phillips screwdriver
3) Flat-blade screwdriver
* 7 mm wide (thick) or less
[Preferably 4 mm wide (thick)]
4) Pliers
5) Braided hose or commercial gas hose (slit vertically)
* To prevent slipping and damage
6) Seal tape
7) O-ring (1AS4)
8) Wire (φ0.9 mm or less)
* To prevent damage
* Replace every time valve
* May be substituted by clip
shaft is disassembled
10 mm