10
5. AUTOMATIC DISPENSING CONTROL
(1) OPERATION PANEL
(2) SETTINGS
a. Overview
Liquid Button
[In ready mode]
Press and hold to dispense liquid
[In flush mode]
Press once to dispense liquid.
Press again to stop.
Dispense Button
(Dispense Lamp)
Lights up when the dispenser is In the
ready mode.
[Press once]
Automatically dispenses the preset
amount of beer.
[Press and hold]
Makes the automatic dispensing
settings available while in the setting
mode.
Flush Button
Switches between the ready mode
and flush mode.
Set Button
[Press once]
Switches between the setting mode
and ready mode (dispense lamp
flashes rapidly).
[Press and hold]
Used to make user settings (“U__” on
display).
Set Lamp
Lights up when the dispenser is in
the setting mode.
Display
Indicates number of mugs
and so on.
Ready mode
Flush mode (after end of operation)
Setting mode (beer amount
）
User settings (make adjustments, check logs)
Check mode (check conditions)
Adjust mode (change settings)
Service
engineer
User
Operation Panel
Foam Button
[In ready mode]
Press and hold to dispense
foam.
[In flush mode]
Press once to dispense foam.
Press again to stop.
Stop Button
[Press once]
Manually stops the beer tap or
platform operation.
[Press and hold]
Reset the display indication
(e.g. number of mugs)
Flush Lamp
Lights up when the dispenser is in
the flush mode.
Sold Out Lamp
Lights up when the keg becomes empty.
