11
b. User Setting Example (checking log of number of mugs)
Staff
Reset number of mugs (press and hold stop button
for 3 sec) when replacing kegs.
e.g.
- In operation -
2) Dispense automatically (real-time
number of
mugs
on display)
* Smaller/larger mug indication switches when
platform is changed.
3) End of 1st keg (display: 30 smaller mugs, 20
larger mugs)
4) Press and hold stop button for 3 sec to
reset
number of mugs
--> Connect new keg and resume automatic
dispensing
5) End of 2nd keg (display: 27 smaller mugs, 21
larger mugs)
6)
Reset number of mugs
--> Resume automatic
dispensing
7) End of 3rd keg (display: 32 smaller mugs, 18
larger mugs)
8)
Reset number of mugs
--> Resume automatic
dispensing
9) Operation ends halfway through 3rd keg
(display: 7 smaller mugs, 5 larger mugs)
10) Clean in flush mode
Administrator
- Initial setting -
1) Set user setting (U01) to “Number of mugs”.
- After end of operation -
11)
Check mug number log by user setting (U02)
Smaller: 7 --> 32 --> 27 --> 30 descending order
Larger: 5 --> 18 --> 21 --> 20 descending order
* Display log for latest 5 kegs.
12)
Check number of keg replacements by user
setting (U04)
“3” on display if keg has been replaced 3 times,
that is, 3 kegs have been used today.
Press and hold stop button for 3 sec to reset to
“0”.
13)
Check number of flush cycles by user setting
(U03)
“1” on display if 1 flush cycle has run.
If “10” is on display after 10 days, 1 flush cycle
per day has run.
Press and hold stop button for 3 sec to reset to
“0”.
