11
Assembly
This assembly manual is for SHCF series Header Wagon models. The example in the illustrations generally applies to all
header wagon models. Model specific instructions are identified in the manual.
The machine is shipped from the factory in a partially disassembled configuration and attached to a pallet that provides
easy moving and handling. Always use tools, equipment and fork lifts of appropriate size and capacity for the job.
When the machine is shipped, follow this safe assembly procedure:
1. Clear the area of bystanders, especially small children.
2. Be sure you have all the required tools before you start.
3. Prepare a clean, clear work area that is accessible from all sides.
4. Remove all the parts from the shipping package, and keep hardware in an accessible place (work bench etc)
STEP 1
Reach & Bottom Rail
1. Set the axle assemblies up on wheel stands, ensure they are secure
from unexpected movement during assembly.
2.
Insert the reach tube to the reach receiver at front & rear axles, and
tighten securely. with a 5/8 x 41/2 bolt and locknut at both ends of the tube.
3.
With a helper, carefully place the 4.0” x 6.0” bottom rail into cradle
brackets on both axles. Center the rail between front and back axles
and secure with two 5/8” u-bolts, washers and locknuts at each end.
!
CAUTION
Operational Hazard
Personal Protection Equipment
(PPE) is required while assembling
or maintaining this machine.
SNL00001
!
CAUTION
Heavy or bulky parts
Prevent potential strain injury, use approved
lifting equipment or ask for help when lifting or
moving heavy, bulky parts.
Reach tube assembly
Cradle
Bracket
Reach
receiver
Bottom rail assembly
Summary of Contents for CONTOUR SHCF36
Page 19: ...19 Notes ...
