4
Assembly Safety
Read and understand the Assembly Manual and all safety signs before starting.
!
CAUTION
Operational Hazard
Personal Protection Equipment
(PPE) is required while assembling
or maintaining this machine.
SNL00001
!
CAUTION
Heavy or bulky parts
Prevent potential strain injury, use approved
lifting equipment or ask for help when lifting or
moving heavy, bulky parts.
!
This Safety Alert Symbol means:
ATTENTION!
BECOME ALERT!
YOUR SAFETY IS INVOLVED!
The Safety Alert symbol identifies important safety messages on the snow blade and in the
manual. When you see this symbol, read and understand the message, be alert to the potential
hazard in the message. Follow the instructions in the safety message.
1. Follow good safety practices:
•
Keep service area clean and dry.
• Be sure electrical outlets and tools are properly
grounded.
• Use adequate light for the job at hand.
2.
Keep the assembly area neat and clean to prevent
slipping or tripping.
3. Position in a large open area to allow access from all
sides during assembly.
4. When using lifting equipment, place jack stands
under the machine to securely stabilize it before
working on, beside or under it during assembly.
5.
Stay away from overhead power lines and
obstructions when lifting the machine during
assembly. Contact with power lines can cause
electrocution. Contact with obstructions can damage
components or cause them to fail.
6.
Don’t handle heavy and/or bulky components alone,
ask for help.
7. Use properly sized tools, stands, jacks and hoists at
all times.
8.
Tighten all fasteners to their specified torque, then
recheck before using the machine
Summary of Contents for CONTOUR SHCF36
Page 19: ...19 Notes ...
