14
!
CAUTION
Heavy or bulky parts
Prevent potential strain injury, use approved
lifting equipment or ask for help when lifting or
moving heavy, bulky parts.
Riser Plates
1. Pin the adjuster bracket to right cast bushing on top
of the axle using 5/8" x 7.0” draw pin, repeat for the
remaining bracket.
Adjuster bracket
2. Next, mount the riser plate to the left cast bushing on
top of axles, and to the top hole on adjuster brackets.
3.
Insert 5/8" x 6" hex bolt, thread the locking nut onto
the bolt and tighten until the bolt is snug against the
plate, do not over tighten.
4. Pin the top rail mount to the top of the riser plate
using 5/8" x 7.0 draw pins, repeat for remaining
channel.
5.
Ensure all assemblies move freely.
6. Repeat for the remaining axle.
Top rail mount
Riser plate
Cast bushing
!
CAUTION
Operational Hazard
Chock wheels while
assembling the wagon
to prevent unwanted
movement.
SNL00002
STEP 4
Summary of Contents for CONTOUR SHCF36
Page 19: ...19 Notes ...
