horsch 24591253, Owner'S Manual

Page: 47 / 68

42
Problem Cause Remedy
Too many skips Too aggressive scraper adjust-
ment
Adjust the outside scraper to a
higher number
Fill level plate incorrectly adjusted Adjust the fill level plate
Vacuum too low Increase the vacuum level
Check lines and connections for
leaks.
Dust Screen Dirty Clean the screen
Seed frequency too high Reduce the working speed
Grain geometry misshapen or
varying
Reduce the working speed
Increase the vacuum
Change the seed
Metering disk incorrectly chosen Change the metering disk
Seed tube sensor dirty
Clean the seed tube with the
supplied brush
Too many doubles Scraper adjustment not aggres-
sive enough
Adjust the outside scraper to a
lower numbe
Vacuum too high Lower the vacuum level
Metering disk incorrectly chosen Change the metering disk
too high
Vacuum incorrectly adjusted Change the vacuum level
Seed frequency too high Reduce the working speed
Dust Screen Dirty Clean the screen
Too many skips/doubles Optimize the setting
Seed extractor or scrapers soiled
by deposits (dressing, dust)
Clean dirty parts
Possible faults - remedy