horsch 24591253, Owner'S Manual

Page: 46 / 68

41
Besides the setting in the metering unit, the plac-
ing quality depends on further factors. It can be

By the speed of the metering disk. It depends
on working speed and seed quantity.

By soil properties and changing soil condi-
tions.

By vibrations and erratic running of the row
units; adapt the coulter pressure accordingly.

By setting and function of the firming wheel.
Check the seed placement periodically

speed (approx. 200 ft) check the seed spacing
. s w o r s u o ir a v f o

Uncover the grains carefully from the side, so
that they will not be displaced in the seed bed.

Measure the placement depth and the grain
spacing. If necessary make adjustments.
The E-Manager shows the nominal grain spacing.
-
ence the seed placement accuracy.
Pay attention to the test results and the
display in the terminal, repeat the test se-
quences in case of negative results.
Changing the setting
Seed problems and faults may be encountered
in grain pick-up (1), on the scraper (2) and in
grain trasfer (3).
1
3
2
to insure accurate seed placement.