HORN LHD6001+, Installation Manual, Page: 8 / 36

Here are the main features and functions of this alarm system.
Support 8 remote controllers and remote 1~7 for Arm/Disarm and compatible to EV1527, Remote 8 for
system status check.
ystem can work without keypad after installation.
2 CMS numbers,1 number for free arm, 1 number for free disarm,4 user numbers.
Compatible with: ADEMCO 4+1 , Contact ID.
1 Bell output
1 PGM output, N.O/N.C optional, Dozens of trigger ways optional.
Support 4 keypads at most, 1 Warning board
10 codes: 1 for installer, 1 for master,7 for users and duress.
Siren call back optional to confirm the success of arm or disarm.
255 Event Logs
Support Patrol function
Support wireless detector low voltage reminding and Supervision function
Single zone arm/disarm
Supporting Testing Mood
1. 8 wired zones and 8 wireless zones.
2.
3. S
4.
5. Messages to CMS optional to save cost.
6. 4 numbers for message sending, event type can be chose
.
7. 2 CMS setting optional.
8.
9. GPRS, PSTN or TCP/IP supported, AND&OR optional.
10. Telephone
line remote programming
,
CMS remotely arm or disarm operation
,
remote controller operation.
11.
12.
13.
14.
15.
16.
17. Anti tamper on panel and keypad, anti-cut on keypad and siren.
18. AC lose, low battery, PSTN lose, siren lose trouble alarm etc..
19. DC
12V
20
.
Disarm
,
Arm
,
panic alarm from keypad and remote control
.
21.
22.
23.
24.
25. system reset via hardware or programming optional.
Main features and functions
- 4 -
Oper
24-hour zone: No matter armed or disarmed, it is in effective detecting status. It is usually used in fire alarm,
plunder alarm and other emergent alarm which can be cancelled only by password holder.
Center Monitoring Station(CMS):Alarm message will be sent to CMS via telephone line which
can take action accordingly after it received the alarm message.
Entry delay: A period for user to enter detection area, activate the delay zone and disarm before the system
alarms. During the period,user can activate several specified zones (entry zone etc) without alarm
immediately. While exceeding the time, the system alarms if not disarmed. Zones with entry delay
refer 7.1 zone type instructions .
Exit delay: A period for user to leave detecting area once the system armed. Zones with exit delay will not alert
during exit delay
Patrol Zone: Security guard can trigger patrol zone of alarm system to send a signal to the CMS center to tell
them they are patrolling this area.
This product transmits alarm information to the user via PSTN, GPRS or TCP/IP and can be remotely controlled to deal
with emergencies in time, ensuring user's personal and property safety. With full functions, flexibility, high resistance to
broken and convenient operations, it is very suitable for residential, store, factory, warehouse, bank, school and
hospital, etc.
Note ： Funcitons related to GPRS andTCP / IP are only present in version 2 . 0.