HORN LHD6001+, Installation Manual, Page: 7 / 36

LED Indication
Power
Alarm away (Red)
Disarm (Green)
Prog
Zone 1
～
16
GPRS
PSTN
TCP/IP
Panic
Off
-
Disarm
-
Q programming uit
Zone Invalid
Not used
Not used or
before dialing to CMS
）
Not used
Normal
Flash Slowly
AC Power lose
Arm Stay
-
Programming
-
Dialing the CMS
-
Flash Quickly
Low battery
-
Panel/Keypad tamper alarm /Module lose
-
Alarming
Server disconnected
CMS communication failed
Server disconnected
Panic Alarm from keypad or remote controller
ON
Normal
Arm Away
Disarm
Keypad lose
Zone activated
Module loss
PSTN loss
Module loss
-
1.
3.
4. Three DI in operation or programming mans operation failed or wrong programming.
Continuous beeping indicates Entry/exit delay, alarming. Please check “Buzzer indication”in
2. “ DI DI” in every 2 minutes means system trouble happened which includes AC Power lose, low battery, CMS communication
failure, bell short circuit, break circuit .
“ DI…” means programming success or arm/disarm success.
page 7 for detailed information.
Buzzer indication
1.
2.
3.
Continuous sound means alarming.
1 sound reminds of successful disarm.
2 sounds remind of successful arm.
4. 4 sounds remind of disarm/arm failure.
Bell signification
Term Definition
Oper
- 3 -
The LED of the zones except those with 24hours zone type will be off when they are disarmed one by one,
or bypassed, or under disarm status. And the LED will be on to show the zones availability.
Server connected
Server connected
Detector: A facility that detects intrusion and abnormal state automatically via some electric or physical
methods and outputs switch signals or wireless signals to the system for disposal, then sends out
alarm signals, such as infrared detector, smoke detector, etc.
Zone: An area within the detection range of one or one ground detectors, described by numbers in the system.
Bypass: Close one of the zones temporarily, so that it can not alarm while activating the zones freely.
Arm-away: The armed state while going out. All the zones without bypass are in alarm state.
Arm-stay: The armed state at night. All the zones are in alarm state except active zone.
Disarm: Cancel the alarm information that has happened. Close the entry/exit zones, active zones,