©2017, 2018, 2019 Horizon Global™ Corp. –
Printed in Mexico
Sheet 7 of 60
24964NP
06-24-19
Rev. C
8.
Reinstall Lower Fascia and Plastic Cover
–
Snap the lower fascia into to
place and reinsert the (2) screws removed in step 2. Then reinstall the
plastic cover with the (4) 10mm nuts and (3) plastic push pins removed in
step 1.
9.
Torque Hardware
–
Tighten all 8mm fasteners to 27 Lb-Ft. (37 N*M), all
10mm fasteners to 42 Lb.-Ft. (57 N*M), and all 7/16 fasteners to 40 Lb.-
Ft. (68 N*M).
Proper torque is needed to keep the hitch secure to the vehicle when
towing.
10. Raise Exhaust
–
Raise the exhaust back into position by reattaching
the rubber isolators to the hangers.
7.
Trim Lower Fascia
–
In the center of the lower fascia cut a 3-inch-wide by
5-inch-long section to give clearance for the receiver tube of the hitch.
(See Figure 3)
HYUNDAI MODELS
HYUNDAI MODELS
HYUNDAI MODELS
HYUNDAI MODELS