©2017, 2018, 2019 Horizon Global™ Corp. –
Printed in Mexico
Sheet 17 of 60
24964NP
06-24-19
Rev. C
1.
Remove Underbody Panel
–
Using a 10mm socket and flat head
screwdriver, remove (4) hex nuts and (3) push pin rivets from underbody
panel on drivers side of vehicle.
2.
Remove Taillights
–
Open liftgate. Remove small access panel from behind
taillights. Using a 10mm socket, remove (4) hex nuts that secure taillights,
both sides. Unplug the wiring and remove the taillights by gently pulling
rearward.
Nuts
Push Pins
3.
(A). Remove Fascia and Bumper Beam Assembly
–
Remove (1)
push pin rivet and (1) phillips head screw from fascia under
taillight area, both sides.
Push pin
Screw
Electrical
Screws
KIA MODELS
KIA MODELS
KIA MODELS
KIA MODELS
Nuts
3. (B). Remove Fascia and Bumper Beam Assembly
–
Using a phillips
head screw driver, remove (3) screws from wheel well liner and
fascia, both sides.