horiba LAQUA-PC1500, Instruction Manual

Page: 30 / 100

pH Calibration
12
Calibration
1. After placing the pH electrode in the buffer solution, press the key.
2. The selected buffer group appears on the meter screen and meter starts checking vari
-
ous calibration values with a blinking on screen.
3. Wait for the to stabilize (stable calibration reading). When it stabilizes, there will be a
sound.
4. Press the ENT key to confirm and save calibration data.
5. Meter displays DONE indicating end of the pH calibration procedure.
6. Repeat for other calibration points as required.
To view and/or print calibration data, press the key when you are in the CAL mode.The
display scrolls through the calibrated values, offset, and slope (average slope for multi-point
calibration).
key
key
Note