5 Printer
5.2 Printer setting
72
HORIBA
5.2
Printer setting
Set up the printer using these settings:
・
Printer output baud rate: 2400 bps
・
Bit length: 8 bits
・
Parity: none
Setting for a plain paper printer (CBM-910)
Set DIP switch No. 6 to ON and No. 7 to OFF, and pre-
pare the printer paper and ink ribbon. Keep the LF key
held down. The printer prints only when the LF key is
being pressed.
Setting for a thermal paper printer (DPU-H245AS)
Prepare printer paper and turn ON the power switch with
the FEED and CHARGE switches held down. Set the
baud rate of the printer to the above value, referring to
the instruction manual for the printer.
Start the function setting mode of the printer and change
it to the above settings.
